Latex Gedeo 250 ml or 1L

Latex Gedeo 250 ml or 1L






Ref: 7586


250 ml or 1 Litre

Creamy Concentrated Latex for quick moulding masks, models and ornaments. Flexible and resistant.

Embossing by brushing on relief:
To produce masks and low relief moulds
Use an old brush to apply a uniform layer. Allow to dry or accelerate drying with a hir dryer.
Repeat process to obtain a thickness of about 2mm
Wait until completely dry 6-12 hours before demoulding
use plasterized strips to make a supporting shell.

Application by dipping: Dilute the latex by 1 volume of water
Dip the subject in the latex
Take out and allow to dry.
Repeat this process until a thickness of 1.5mm is obtained
Wait until completely dry 6-12 hours before demoulding
Dust the outside of the mould with talcum powder and turn back to demould

Recommendations for resin reproduction:
First coat the mould with vaseline
Protect brushes with a layer of Vaseline before dipping into latex.
To stengthen the latex use plaster strips between coats.
wear gloves and avooid contact with skin

Manufacturer: Gedeo

Ref 7586

766331 / 5

  Price: 6.88 (Including VAT at 20%)

Size

Quantity: